|
- Fast and easy to install
- Simple controls
- No moving parts in foaming gun
- Stainless steel foaming gun does not corrode
- All stainless valves and plumbing
- Comes assembled and tested
- Heated enclosure for cold weather operation
- Automatic air purge clears water out of lines at
shut down
- MicroBubble™ technology uses 1,000 psi
- Best WMA for lower temperatures
- Retains only 1/4 cup of water per ton of warm mix asphalt
AQUABlack® delivers distinct advantages with MicroBubble™ foaming technology.
JUST ANNOUNCED! View exciting new information on our AQUABlack® System!
 Size matters. Large bubbles that are formed when water is mixed with liquid asphalt quickly dissipate and leave an unmodified binder. Microbubbles are the key because they stay in the mix until it’s compacted. MAXAM’s MicroBubble™ technology uses 1,000 psi to far out-perform all other systems in microbubble formation to produce the highest quality WMA.
The AQUABlack® System costs significantly less than most of the WMA systems currently available. In some cases, half the price.
AQUABlack® retrofits any asphalt plant quickly and easily. It installs in just two days – you can get it done over the weekend with a two man crew. You can do it yourself, or have us do the intallation for you. The unit comes completely assembled. Simply attach it to your A/C line, hook it up to a water source, install the control panel, and you’re ready to go.
The touch-screen Control Panel is mounted in the control
house and easily connected to the metering system using
multi-conductor cable. When the operator sets max tons on
the control panel, the system automatically calculates the
correct amount of water to be injected into the warm mix asphalt, and
sets the water pump drive to the proper output rate. A mass
flow meter monitors flow rate and sounds a warning if it goes
out of the optimum range.
The AQUABlack® all stainless Foaming Gun comes with all
required water hose and hot oil jumpers for installation. It is
inserted into the existing a/c line just prior to entering the
drum. Access nozzle service ports means that no disassembly
is required for inspection of your system.
The center convergence nozzle design provides more efficient foaming. It reduces the number of nozzles and the maintenance related to each. The high-pressure system enables low water-to-liquid-asphalt ratio during foaming. There are no moving parts in the foaming gun. We do not give each nozzle it’s own solenoid because fewer solenoids means fewer maintenance issues.
Download an informational brochure on warm mix asphalt. Click Here.
|
